Testmoz
Home
Features
Pricing
FAQs
Build a Test
Login/Sign Up

Apprentice Test

Is this your test? Login to manage it. If not, you can generate an assessment just like it.

This is a non-interactive preview of the quiz content.

1.
1 point
Boundary microphones usually require phantom power.
2.
1 point
When taping cables, the cable path should be composed of ____.
3.
1 point
The Master control regulates the ___ signal of an audio mixer.
4.
1 point
Challenging customers are always negative customers.
5.
1 point
A GOBO fits into a frame in front of a PAR.
6.
1 point
To estimate the required distance from the projector to the screen, multiply the screen width by ____.
7.
1 point
If using a separate mixer and amplifier, turn on the amplifier first, then the mixer.
8.
1 point
Other common terms used to refer to an audio mixer are ____.
9.
1 point
When is it appropriate to tape cables on show site?
10.
1 point
If a mixer does not have an amplifier, connect the ____ of the mixer to an external amplifier.
11.
1 point
Lavalier microphones are not typically used with wireless microphone systems.
12.
1 point
Using overhead projectors with spare lamps, it is permissible to change lamps while the projector is on.
13.
1 point
Always tack cable as close to the wall as possible.
14.
1 point
Plug the HD15 connector attached to the cable to the ____ connector on the laptop.
15.
1 point
Folding screens may only be used for front-projection applications.
16.
1 point
How many colts does it take to safely hang two pieces of truss?
17.
1 point
Setup of a flat panel display requires only one technician.
18.
1 point
A microphone is considered to be an output device.
19.
1 point
When connecting one laptop to two projectors, the ____ of the distribution amplifier is connected to the input of each projector.
20.
1 point
When setting microphones for an on stage panel, where should the excess cable be place?
21.
1 point
How many pins are typically in a DMX Cable?
22.
1 point
a 5-Wire BNC (RGBhv) cable can carry a VGA signal?
23.
1 point
When setting up two laptops to one projector, make sure the projector's input is connected to the ____ output.
24.
1 point
When setting up two laptops to one projector, connect two HD15 cables to the output of the switcher.
25.
1 point
During an event, avoid requests for copies of software or CDs. It is better to suggest that the person connect his recording device to your equipment.
26.
1 point
To provide fullness, the number of drape panels used on a crossbar should equal ____ the length of the crossbar.
27.
1 point
Which of the following is an important guideline following an event?
28.
1 point
Two projectors can be connected to the outputs of a distribution amplifier.
29.
1 point
This type of microphone requires batteries or phantom power.
30.
1 point
When bolting truss together, the compression bars or "webs" should be _____.
31.
1 point
After an event, cables should be carefully coiled and wrapped with ___.
32.
1 point
An HD15 connector is also known as a ____ connector.
33.
1 point
The push-to-talk system is also known as a ____.
34.
1 point
The checklist of equipment delivered to the venue needs only to be referenced during the unloading process.
35.
1 point
Connect all power and signal cables between a laptop and projector before turning the power on to any of the equipment.
36.
1 point
A signal originates from an output device.
37.
1 point
To connect a video source to a projector, you will need three ____ cables.
38.
1 point
A microphone with a heart-shaped pickup pattern is called a ___ microphone.
39.
1 point
A skewed projection image may be adjusted by using the ____ feature on the projector.
40.
1 point
Do not locate a video projector too close to attendee seating due to ____.
41.
1 point
A signal is useful information converted into
42.
1 point
When connecting one laptop to two projectors, make sure the projectors are set to display the ____ input.
43.
1 point
An audio mixer should always be placed as close to the stage as possible?
44.
1 point
Demonstrating professionalism by providing good service includes
45.
1 point
The goal of dressing cable is to avoid a tripping hazard.
46.
1 point
Run electrical and signal cables to a flat panel display ____ it is mounted to its support system.
47.
1 point
Safety tape should be used to cover cables placed in high traffic areas because it ____.
48.
1 point
To avoid feedback, loudspeakers should always be placed ___ the microphones.
49.
1 point
When meeting for the first time, wait for customers to introduce themselves.
50.
1 point
A distribution amplifier has ____ input(s) and many outputs.
Home Features Pricing FAQs Legal Sample Tests Build a Test Login/Sign Up