Testmoz
Home
Features
Pricing
FAQs
Build a Test
Login/Sign Up

Chapter 10 A+ Part 2

Is this your test? Login to manage it. If not, you can develop a test just like it.

This is a non-interactive preview of the quiz content.

1.
1 point
Capable of transferring data up to 1 Gbps per data path
2.
1 point
Follows the 5-4-3 rule of networking
3.
1 point
A switch running in this mode reads the entire data frame into its memory and checks it for accuracy before transmitting the information
4.
1 point
The most common 1-Gigabit Ethernet
5.
1 point
_________ are combinations of networking hardware and software that connect two dissimilar kinds of networks
6.
1 point
A(n) __________ NIC is integrated into the motherboard
7.
1 point
Also known as fast Ethernet
8.
1 point
Refers to the PoE device that receives the power
9.
1 point
Connectivity device that subdivides a network into smaller logical pieces
10.
1 point
A(n) _________ is software that enables an attached device to communicate with the computer's operating system
11.
1 point
Holds incoming data and accommodates bursts or traffic
12.
1 point
A router that directs data between nodes on an autonomous LAN (or one owned and operated by a single organization) is known as a(n) ________ router
13.
1 point
Because of its support for multiple Network layer protocols and because it uses fewer bytes as overhead, _____________ is the frame type most commonly used on contemporary Ethernet networks
14.
1 point
Devices that connect two network segments by analyzing incoming frames and making decisions about where to direct them based on each frame's MAC address
15.
1 point
____________ is a component of a network's logical topology that determines how connections are created between nodes
16.
1 point
IEEE standard for fiber-optic Ethernet networks transmitting data at 1 Gbps
17.
1 point
In a(n) _______ topology, every node on the network is connected through a central device, such as a hub, router, or switch
18.
1 point
Has no means to interpret the data they transmit
19.
1 point
Plugs into a port and crosses over the transmit line to the receive line so that outgoing signals can be redirected into the computer for testing
20.
1 point
IEEE standard for fiber-optic Ethernet networks transmitting data at 100 Mbps
21.
1 point
Also known as Gigabit Ethernet
22.
1 point
Logically separate networks within networks
23.
1 point
A switch running in this mode reads a frame's header and decides where to forward the data before it receives the entire packet
24.
1 point
A computer's ________ is the circuit, or signaling pathway, used by the motherboard to transmit data to the computer's components, including its memory, processor, hard disk, and NIC
25.
1 point
________ routing is a technique in which a network administrator programs a router to use specific paths between nodes
26.
1 point
As a part of CSMA/CD, a process known as __________ allows the NIC issue a special 32-bit sequence that indicates to the rest of the network nodes that its previous transmission was fault and that those data frames are invalid
27.
1 point
Refers to the PoE device that supplies power
28.
1 point
IEEE standard for fiber-optic Ethernet networks transmitting data at 10 Gbps
29.
1 point
On a Linux workstation, a popular utility called __________ allows you to view and change NIC settings
30.
1 point
A network _________ is the part of a network to which segments and significant shared devices connect
Home Features Pricing FAQs Legal Sample Tests Build a Test Login/Sign Up