COMNAVAIRFORINST 4790.2B (WITH CHANGE-1), THE NAVAL AVIATION MAINTENANCE PROGRAM (NAMP); CHAPTER 5 - Part 1

Maintenance of logs and records and CM ALS must be performed by what? (Page 5-27)

What form is used to record significant information affecting the aircraft for which no other space is provided in the logbook? (Page 5-85)

What report (OPNAV 4790/64) is used to record SE issue and receipt transactions?

What is a general inspection of a specific area of an aircraft? (Page 5-13)

OMA NALCOMIS Optimized squadrons shall have how many SA's attend the NALCOMIS OOMA System Administrator course? (Page 5-1)

Who shall provide qualitative and quantitative analytical information to the MO allowing a continuous review of the management practices within the activity/department? (Page 5-28)

Instructions for using the material priority system and for assigning FADs are in what series? (Page 5-25)

What, with few exceptions, is a manifestation of a logistic or maintenance support system failure? (Page 5-29)

Who shall determine when an aircraft will be placed in preservation? (Page 5-9)

What is designed to protect the material condition of aircraft that are not expected to be flown for extended periods of time? (Page 5-22)

Unless otherwise indicated by the PMIC, a plus or minus percent of what amount of the engine inspection interval is allowed for scheduling purposes (Page 5-17)

What training is necessary to provide personnel assigned to AIMD Afloat/Ashore, FRC, or MALS with the managerial tools required to implement a process of ongoing improvement? (Page 5-24)

What is defined as "the efficient attainment of objectives?" (Page 5-1)

What provides guidance for shipping classified information to the Washington National Records Center? (Page 5-71)

What are required to determine whether the airframe, power plant, accessories, and equipment are functioning per predetermined standards while subjected to the intended operating environment? (Page 5-5)

Pilots and crew members who perform FCFs shall be qualified per what instruction and the applicable aircraft NATOPS manual? (Page 5-7)

What form is used to record acceptance information, custody and transfer, rework, preservation and de-preservation, TDs, and any other miscellaneous history required to accompany the SE throughout its service life? (Page 5-19)

The purpose of what meeting is to prepare changes to the SCC, including TD compliances, any additional maintenance requirements, and to plan for the replacement of SRC items and other required material? (Page 5-11)

What is designed to provide a current configuration and inspection records of ALSS components, kits, and assemblies? (Page 5-98)

All repairable SE components beyond IMA repair capability shall be preserved, packaged, documented, and shipped within what time frame? (Page 5-32)

As a general guideline no more than how many months should elapse between the ASPA inspection and the resulting adjusted PED? (Page 5-15A)

Engines with major inspection intervals of how many hours or more will have major inspections performed if 25 percent of less of the interval remains until the next inspection? (Page 5-18)

When an aircraft has been procured for the DON under a DOD contract, and delivery is made to the DON at the contractor's pant, who is considered to be the original accepting activity? (Page 5-68)

What is a two page form that provided a method of monitoring specific maintenance data on designated aeronautical components and equipment that do not qualify for an SRC card? (page 5-116)

OPNAVINST 3110.11 requires rework induction not later than how many days after the current PED when the ASPA evaluation determines that aircraft general material condition satisfies rework induction criteria? (Page 5-16)

Who shall provide qualitative and quantitative analytical information to the MO allowing a continuous review of the management practices within the activity/department? (Page 5-1)

Unless otherwise specified in aircraft MRC's, fuel samples shale be taken within how many hours preceding the aircraft's initial launch and shall not be valid for more than 24 hours? (Page 5-4)

What is a loose-leaf record that may be inserted in the aircraft logbook or may stand alone/ (Page 5-103)

What inspections are special inspections base on calendar days and are authorized a plus or minus three days deviation during compliance by the prescribed maintenance level? (Page 5-20)

Completed FCF checklist shall be retained in the aircraft maintenance files for a minimum of how long or one phase cycle, whichever is greater? (Page 5-7)

What is an operational evolution where the pilot/crew of an aircraft is changed while the engine is operating and the aircraft is to be immediately re-launched (Page 5-5)

What is a two page form used to record maintenance history, installation, and usage data? (Page 5-121)

How many days advance notice, via naval message, is required prior to sending an aircraft to the AMARC for storage? (Page 5-17)

What post inspection is performed at the time a reporting custodian receives an aircraft form on-site standard and special rework? (Page 5-16)

What are assigned to identify requisitions and related documents applicable to specific projects or programs? (Page 5-25)

If operating NTCSS Optimized OMA NALCOMIS, the SA/A shall retain copies of the weekly summary of NALCOMIS Baseline change reports for how long? (Page 5-13)

What's function is a general-purpose life stage and serialized configuration tracking system? (Page 5-128)

All persons shall have in their possession what valid document for specific equipment being returned? (Page 5-19)

What material is to be repaired at that level of maintenance that will ensure optimum economic use of resources consistent with assigned availability and readiness standards? (Page 5-34)

All activities in the Navy are assigned a what for determining priorities for material support based on their mission? (Page 5-25)

What is an operational evolution where an aircraft is refused wile engine is operating? (Page 5-5)

What is used to maintain a current inventory of all equipment, components, and assemblies requiring an MSR, ASR, EHR, or SRC card? (Page 5-90)

The purpose of what is to provide scheduled control of the predictable maintenance workload, for example, inspections, transfer or receipt of aircraft, and compliance with TDs? (Page 5-21)

The daily inspection is valid for a period of how long commencing form the date and time the inspection is completed, provide no flight occurs during this period and no maintenance other than servicing has been performed? (Page 5-12)

What instruction required an ASPA evaluation between 6 months prior to and 3 months after PED of each ASPA aircraft to determine its general material condition relative to established induction criteria? (Page 5-15A)

The repair of a gas turbine engine to a depth which includes replacement of compressor rotor or other repairs to the same depth, identified in the maintenance allocation table of the applicable MIM, is classified as what type of unscheduled repair? (Page 5-18)

What is defined as "all actions taken to retain material in a serviceable condition or to restore it to serviceability?" (Page 5-1)

The purpose of what is to provide operating units with a sufficient number of safe, reliable, mission capable aircraft to perform their assigned missions? (Page 5-21)

FCF checklists are published by what command whenever a checklist is required? (Page 5-7)

What is responsible for the management and upkeep of the IN/OUT boxes in CM via Inventory and Group Explorer? (Page 5-134)