CCNP CH5

1.

1 point

Which two commands can be used to verify that an offset list has altered the path taken by traffic? (Choose two.)

ping

traceroute

show ip protocols

show running-config

telnet

show ip route

2.

1 point

Refer to the exhibit. On the basis of the information presented, which statement is true?

IP SLA operation 99 has lost connectivity to 172.16.12.2.

IP SLA operation 99 is currently monitoring the network 192.168.2.0/24.

A default static route was configured with the track keyword.

EIGRP was configured to track the host at IP address 192.168.2.1.

3.

1 point

A BGP routing policy has been created using route maps. The command
route-map TEST permit 10
is part of the configuration. What does the argument 10 indicate?

It indicates the local preference to be set for routes that match the route map.

It indicates the metric to be set for routes that match the route map.

It identifies the position of the route map in relation to other instances.

It identifies the access list number to be used by the route map statement.

It specifies the route map to be used on autonomous system 10.

4.

1 point

Refer to the exhibit. On the basis of the information presented, which two IP SLA related statements are true?(Choose two.)

IP SLA 99 was configured with the type dns target-addr 192.168.2.1 command.

IP SLA 99 is sending echo requests from IP address 192.168.2.1.

IP SLA 99 will run forever unless explicitly disabled.

IP SLA 99 is sending echo requests every 10 seconds.

IP SLA 99 is scheduled to begin in 2 hours.

IP SLA 99 is measuring jitter.

5.

1 point

Refer to the exhibit. Which configuration will ensure that traffic that originates from network 172.16.1.0 will be forwarded out Serial 0/0/0?

R1(config)# access-list 1 permit 172.16.1.0 255.255.255.0 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface serial 0/0/0 R1(config)# interface fa0/0

R1(config)# access-list 1 permit 172.16.1.0 0.255.255.255 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface fa0/1 R1(config)# interface s0/0/0 R1(config-if)# ip policy route-map ISP-1

R1(config)# access-list 1 permit 172.16.1.0 0.255.255.255 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface fa0/0 R1(config)# interface s0/0/0 R1(config-if)# ip policy route-map ISP-1

R1(config-if)# ip policy route-map ISP-1 R1(config)# access-list 1 permit 172.16.1.0 0.0.0.255 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface s0/0/0 R1(config)# interface fa0/1 R1(config-if)# ip policy route-map ISP-1

R1(config)# access-list 1 permit 172.16.1.0 0.0.0.255 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface s0/0/0 R1(config)# interface s0/0/0 R1(config-if)# ip policy route-map ISP-1

6.

1 point

What is the purpose of using an offset list when implementing path control in EIGRP?

to measure EIGRP updates and then trap them once they meet a specific threshold

to increase incoming and outgoing metrics to routes learned by EIGRP

to filter EIGRP updates in a continuous, reliable, and predictable manner

to cause the router to evaluate for inconsistencies all packets that come into an interface

7.

1 point

Which IP SLA statement is true?

IP SLA operations are configured on a target device.

An IP SLA responder could be a web server or an IP host.

Cisco IOS IP SLAs use passive traffic monitoring, generating traffic in a random manner to measure network performance.

To increase security of IP SLAs control messages, Message Digest 5 (MD5) authentication can be used.

8.

1 point

What are three accurate descriptors of the functionality of the Cisco IOS IP SLA feature? (Choose three.)

verification that the TCP or UDP ports on a target are active and responsive

the sending of simulated data

applies only to distance vector protocols

the filtering of routing updates to and from neighbors

provision of a mechanism to mark packets with different ToS

a requirement that NTP be configured on source and responder

9.

1 point

Quality of Service (QoS) and Cisco Wide Area Application Services (WAAS) are two examples of which pathcontrol consideration?

availability

resiliency

support for network and application services

adaptability

10.

1 point

Refer to the exhibit. Based on the information that is presented, which statement is true?

Access list 1 specifies that packets with a destination address of 192.168.1.0 will be policy routed.

Both match statements must be true for the ISP1 route map to be true.

Access list 2 specifies that packets with a source address of 172.16.1.0 will be policy routed.

Packets that match access list 1 will be sent to the next-hop address 172.17.1.2.

Packets that match access list 2 will be denied access.

11.

1 point

Which two descriptions are accurate about the path control functionality of offset lists? (Choose two.)

used to increase metrics

provides a mechanism to mark packets with ToS

can be applied to routes that are learned via dynamic routing protocols

can be applied to only the inbound direction on an interface

can be applied only to routes that are learned via distance vector protocols

used to increase administrative distance

12.

1 point

Refer to the exhibit. The routing policy for router R1 states that traffic from the 192.168.1.0 LAN network is to be routed to ISP-1 and traffic from the 172.16.1.0 LAN network is to be routed to ISP-2. However, the network administrator notices that a host at IP address 172.16.1.10 is being routed out Serial0/0/0. What is the cause of the problem?

There is an incorrect access list 2 statement.

The route maps are applied to opposite interfaces.

There is an incorrect access list 1 statement.

The route map ISP-1 should be applied to Serial0/0/0.

The route map ISP-2 should be applied to Fast Ethernet0/1.

13.

1 point

Refer to the exhibit. What would be the RIP routing metric for the subnets of the 172.16.0.0/16 network on theR2 router after the configuration in the exhibit was applied to the R1 router?

5

3

2

1

4

14.

1 point

Refer to the exhibit. RIPv2 is configured on routers in the network. Which commands would an administrator issue on the R3 router in order for traffic to take the fastest path from R4 to the 192.168.1.0 network on the R1router?

router ripip prefix-list 1 in 2 outaccess-list 1 permit 192.168.1.0 0.0.0.255

router rip offset-list 1 out 5 serial 0/0/1 access-list 1 permit 192.168.1.0 0.0.0.255

router rip

router ripdistribution-list 1 outaccess-list 1 permit 192.168.1.0 0.0.0.255

router ripoffset-list 1 in 5 serial 0/0/0access-list 1 permit 192.168.1.0 0.0.0.255

15.

1 point

Which path control consideration creates an effective use of bandwidth by having traffic use different paths for opposite directions?

performance

adaptability

availability access-list 1 permit 172.16.1.0 255.255.255.0 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface serial 0/0/0 R1(config)# interface fa0/0

asymmetric routing

predictability

16.

1 point

Routing protocol convergence time would be an example of which path control consideration?

adaptability

performance

availability

resiliency

predictability

17.

1 point

When policy-based routing (PBR) is being implemented, which
set command will override explicit entries in the routing table?

set ip next-hop

set default interface

set ip default next-hop

set ip precedence

18.

1 point

Refer to the exhibit. Assuming all FastEthernet interfaces have been configured with the
ip policy route-map LOAD_BALANCE
command and are up, how will router R1 treat packets that are received from network 10.2.0.0 and destined for the Internet?

will be forwarded out interface S0/0/0

will be dropped by R1 access-list 1 permit 172.16.1.0 255.255.255.0 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface serial 0/0/0 R1(config)# interface fa0/0

will be routed normally based on the routing table

will be load balanced through each serial interface access-list 1 permit 172.16.1.0 0.255.255.255 R1(config)# route-map ISP-1 permit 10 R1(config-route-map)# match ip address 1 R1(config-route-map)# set interface fa0/1 R1(config)# interface s0/0/0 R1(config-if)# ip policy route-map ISP-1

will be forwarded out interface S0/1/0

19.

1 point

Which path control consideration helps provide an acceptable level of service when a failure occurs?

support for network and application services

performance

resiliency

availability

adaptability

20.

1 point

Which two IP SLA path control statements are true? (Choose two.)

IOS IP SLA is a mechanism for increasing incoming and outgoing metrics to routes that are learned via RIP or EIGRP.

The IOS IP SLA feature can only measure performance statistics between Cisco devices.

The IOS IP SLA feature can only measure performance statistics between a Cisco device and a host.

The IOS IP SLA feature allows performance measurements between a Cisco device and another Cisco device or a host.

The IOS IP SLA feature is only configurable using the command-line interface (CLI).

An IP SLA operation is a measurement that includes protocol, frequency, traps, and thresholds.