119

Is this your test? Login to manage it. If not, you can create a test just like it.

This is a non-interactive preview of the quiz content.

1.
1 point
frequency range
2.
1 point
modulation is Frequency Modulated (FM)
3.
1 point
electronic key used to encrypt/decrypt transmitted messages.
4.
1 point
CEOI assigned single channel, plain text frequency on which a SINCGARS NCS may be signaled to switch to and standby for a message from another station
5.
1 point
rated range Power Amplifier is 22 miles.
6.
1 point
rated range High is 2.5 miles - 5 miles.
7.
1 point
channels of operation
8.
1 point
mode of SINCGARS, used by all stations except the NCS, which allows the RT to receive passive late net entry synchronization.
9.
1 point
rated range Medium is 330 yds -2.5 miles.
10.
1 point
set of data sufficient to describe frequency hopping and COMSEC on one or more SINCGARS radio nets.
11.
1 point
method of transmission where the radio automatically changes frequencies in constant and rapid succession.
12.
1 point
modes of operation are single channel, frequency hopping, frequency hopping master, retransmission, and remote.
13.
1 point
electronic key used by FM radios to determine the pseudo-random pattern that is utilized when hopping in the given frequencies or hop set.
14.
1 point
method of re-synchronizing a net radio whose internal clock has drifted beyond the (+/-) 4 seconds from the NST
15.
1 point
act of hailing the NCS using the cue frequency.
16.
1 point
Antennas
17.
1 point
three digit numeric code between 000 and 999 used to identify a SINCGARS net.
18.
1 point
Power Amplifier RF power out put is 50 watts
19.
1 point
Frequency offset capability
20.
1 point
Emission types
21.
1 point
time as maintained by a net control station that is used to keep net member radio stations synchronized with each other for frequency hopping operations.
22.
1 point
High RF power out put is 4 watts.
23.
1 point
number of preset channels
24.
1 point
Medium RF power out put is 160 milliwatts.
25.
1 point
SINCGARS stands for Single Channel Ground and Airborne Radio System
26.
1 point
frequency is entered manually by using keyboard up to 8 single channels, 6 FH channels can be loaded.
27.
1 point
ability to overcome or avoid jamming. SINCGARS are capable of frequency hopping at a rate of up to 6000 frequencies p/m.
28.
1 point
CEOI - assigned single channel frequency assigned to transmit fill data electronically between SINCGARS and radios via ERF
29.
1 point
process of opening a frequency hopping net in which net operators load all required COMSEC, FH data, and sync time from their ANCD and merely check into the net at a prescribed time.
30.
1 point
power requirement of AN/PRC 119
31.
1 point
Integrated Communication security.
32.
1 point
KEK is used to encrypt/decrypt TEK's transmitted during the OTAR process.
33.
1 point
mode of SINCGARS, reserved for the NCS of an FH net, which allows CUE calls to be effectively received and sends NST with each transmission.
34.
1 point
process of opening a net by physically distributing a TSK, then transmitting FH data to net subscribers by an ERF
35.
1 point
rated range Low is 0-330 yrds.
36.
1 point
channel spacing
37.
1 point
components of the AN/PRC - 119.
38.
1 point
group of authorized frequencies which a SINCGARS circuit/net will utilize to hop on.
39.
1 point
method used by the net ccontrol station to transmit a new TEK as a replacement for one already held by the net subscribers.
40.
1 point
set of data sufficient to describe frequency hopping and COMSEC on one or more SINCGARS radio nets.
41.
1 point
modes of operation are single channel, frequency hopping, frequency hopping master, retransmission, and remote.
42.
1 point
Method of entering the net in which a station cues the NCS and the NCS sends the required fill data using an ERF.
43.
1 point
method used by the net control station to transmit FH data to an RT at another location.
44.
1 point
Low RF power out put is 500 microwatts.
45.
1 point
set of data sufficient to describe frequency hopping on one SINCGARS radio net.