ccna

1.

1 point

Which three components must be configured when implementing a clientless SSL VPN on an ASA 5505 device? (Choose three.)

bookmark lists

client address assignment

client images

connection profile name

group policy

NAT exemption rules

VPN protocol (SSL or IPsec or both)

2.

1 point

Which three components must be configured when implementing a client-based SSL VPN

on an ASA 5505 device? (Choose three.)

bookmark lists

client address assignment

client image

DHCP pools

group policy

SSL or IPsec

3.

1 point

Which three security features do ASA models 5505 and 5510 support by default? (Choose three.)

content security and control module

Cisco Unified Communications (voice and video) security

intrusion prevention system

stateful firewall

VPN concentrator

Zone-Based Policy Firewall

4.

1 point

Refer to the exhibit. What will be displayed in the output of the show running-config object command after the exhibited configuration commands are entered on an ASA 5505?

host 192.168.1.3

host 192.168.1.4

range 192.168.1.10 192.168.1.20

host 192.168.1.3 and host 192.168.1.4

host 192.168.1.4 and range 192.168.1.10 192.168.1.20

host 192.168.1.3, host 192.168.1.4, and range 192.168.1.10 192.168.1.20

5.

1 point

Refer to the exhibit. An administrator has entered the indicated commands on an ASA 5505. Based on the information presented, what type of remote access VPN has the administrator configured?

a clientless SSL VPN via the Cisco AnyConnect Client

a clientless SSL VPN via a web browser

an IPsec (IKEv1) VPN via the Cisco VPN Client

an IPsec (IKEv1) VPN via a web browser

an SSL or IPsec (IKEv2) VPN via the Cisco AnyConnect Client

an SSL or IPsec (IKEv2) VPN via a Cisco VPN Client

6.

1 point

Refer to the exhibit. According to the exhibited command output, which three statements are true about the DHCP options entered on the ASA 5505? (Choose three.)

The dhcpd auto-config outside command was issued to enable the DHCP client.

The dhcpd address [start-of-pool]-[end-of-pool] inside command was issued to enable the DHCP client.

The dhcpd enable inside command was issued to enable the DHCP client.

The dhcpd auto-config outside command was issued to enable the DHCP server.

The dhcpd address [start-of-pool]-[end-of-pool] inside command was issued to enable the DHCP server.

The dhcpd enable inside command was issued to enable the DHCP server.

7.

1 point

Which two statements correctly describe the ASA as an advanced stateful firewall? (Choose two.)

An ASA uses the Zone-Based Firewall feature and tracks the state of the TCP or UDP network connections that are traversing the network.

In routed mode, an ASA can support two or more Layer 3 interfaces.

In routed mode, an ASA requires a management IP address that is configured in global configuration mode.

In transparent mode, each interface has an associated security level.

The first packet of a flow examined by an ASA goes through the session management path.

8.

1 point

What are three characteristics of ASA transparent mode? (Choose three.)

This mode does not support VPNs, QoS, or DHCP Relay.

The interfaces of the ASA separate Layer 3 networks and require IP addresses in different subnets.

It is the traditional firewall deployment mode.

NAT can be implemented between connected networks.

This mode is referred to as a “bump in the wire.”

In this mode the ASA is invisible to an attacker.

9.

1 point

Which three wizards are included in Cisco ASDM 6.4? (Choose three.)

ADSL Connection wizard

Advanced Firewall wizard

High Availability and Scalability wizard

Security Audit wizard

Startup wizard

VPN wizard

10.

1 point

Refer to the exhibit. Which three sets of configuration commands were entered on the ASA 5505? (Choose three.)

interface e0/0 nameif outside security-level 0 ip address 209.165.200.226 255.255.255.248 no shut

interface e0/0 switchport access vlan 2 no shut exit

interface vlan 2 nameif outside security-level 0 ip address 209.165.200.226 255.255.255.248

ip route 0.0.0.0 0.0.0.0 209.165.200.225

route inside 0.0.0.0 0.0.0.0 209.165.200.225

route outside 0.0.0.0 0.0.0.0 209.165.200.225

11.

1 point

Refer to the exhibit. Which ASDM menu sequence would be required to configure Telnet or SSH AAA authentication using a TACACS server first or the local device user database if the TACACS server authentication is unavailable?

Configuration > Device Management > Management Access > ASDM/HTTPS/Telnet/SSH

Configuration > Device Management > Management Access > Management Interface

Configuration > Device Management > Users/AAA > AAA Access

Configuration > Device Management > Users/AAA > AAA Server Group

Configuration > Device Management > Users/AAA > User Accounts

12.

1 point

When the ASA recognizes that the incoming packets are part of an already established connection, which three fast path tasks are executed? (Choose three.)

adjusting Layer 3 and Layer 4 headers

allocating NAT translations (xlates)

performing IP checksum verification

performing route lookups

performing TCP sequence number checks

performing the access list checks

13.

1 point

Which option lists the ASA adaptive security algorithm session management tasks in the correct order?

1) allocating NAT translations (xlates) 2) establishing sessions in the “fast path” 3) performing route lookups 4) performing the access list checks

1) establishing sessions in the “fast path” 2) performing the access list checks 3) allocating NAT translations (xlates) 4) performing route lookups

1) performing route lookups 2) establishing sessions in the “fast path” 3) allocating NAT translations (xlates) 4) performing the access list checks

1) performing route lookups 2) allocating NAT translations (xlates) 3) performing the access list checks 4) establishing sessions in the “fast path”

1) performing the access list checks 2) performing route lookups 3) allocating NAT translations (xlates) 4) establishing sessions in the “fast path”

14.

1 point

Which three types of remote access VPNs are supported on ASA devices? (Choose three.)

Clientless SSL VPN using the Cisco AnyConnect Client

Clientless SSL VPN using a web browser

IPsec (IKEv1) VPN using the Cisco VPN Client

IPsec (IKEv1) VPN using a web browser

SSL or IPsec (IKEv2) VPN using the Cisco AnyConnect Client

SSL or IPsec (IKEv2) VPN using the Cisco VPN Client

15.

1 point

Which three components must be configured when using the Site-to-Site VPN Connection Setup wizard in ASDM? (Choose three.)

authentication method

bookmarks

crypto maps

encryption algorithms

GRE tunnel specifications

IKE version

16.

1 point

In what three ways do the 5505 and 5510 Adaptive Security Appliances differ? (Choose three.)

in the method by which they can be configured using either CLI or ASDM

in their compatibility with Cisco SecureX technology

in the maximum traffic throughput supported

in the number of interfaces

in operating system version support

in types of interfaces

17.

1 point

Refer to the exhibit. A remote host is connecting to an ASA 5505 via a VPN connection. Once authenticated, the host displays the highlighted system tray icon. On the basis of the information that is presented, what three assumptions can be made? (Choose three.)

The host web browser window is displaying the ASA SSL web portal webpage containing bookmarks.

The host has connected to the ASA via a client-based SSL VPN connection.

The host is connected via the AnyConnect VPN client.

The host is connected via the Cisco VPN client.

Using the ipconfig command on the host displays one IP address from the originating network.

Using the ipconfig command on the host displays an IP address from the originating network and an IP address for the VPN connection.

18.

1 point

Which Cisco ASDM menu sequence would be used to edit a client-based AnyConnect SSL VPN configuration?

Configuration > Remote Access VPN > Advanced

Configuration > Remote Access VPN > Clientless SSL VPN Access

Configuration > Remote Access VPN > Easy VPN Remote

Configuration > Remote Access VPN > Network (Client) Access

Monitoring > VPN > VPN Sessions

Monitoring > VPN > Clientless SSL VPN

19.

1 point

An administrator has successfully configured a site-to-site VPN on an ASA 5505. Which ASDM menu sequence displays the number of packets encrypted, decrypted, and security association requests?

Configuration > Site-to-Site VPN > Advanced

Configuration > Site-to-Site VPN > Connection Profiles

Configuration > Site-to-Site VPN > Group Policies

Monitoring > VPN > VPN Statistics > Crypto Statistics

Monitoring > VPN > VPN Statistics > Encryption Statistics

Monitoring > VPN > VPN Statistics > Sessions

20.

1 point

Which option lists the four steps to configure the Modular Policy Framework on an ASA?

1) Configure a policy map to apply actions to the identified traffic. 2) Configure a service policy to identify which interface should be activated for the service. 3) Configure extended ACLs to identify specific granular traffic. This step may be optional. 4) Configure the class map to define interesting traffic.

1) Configure a service policy to identify which interface should be activated for the service. 2) Configure extended ACLs to identify specific granular traffic. This step may be optional. 3) Configure the class map to define interesting traffic. 4) Configure a policy map to apply actions to the identified traffic.

1) Configure extended ACLs to identify specific granular traffic. This step may be optional. 2) Configure the class map to define interesting traffic. 3) Configure a policy map to apply actions to the identified traffic. 4) Configure a service policy to identify which interface should be activated for the service.

1) Configure extended ACLs to identify specific granular traffic. This step may be optional. 2) Configure the class map to define interesting traffic. 3) Configure a service policy to identify which interface should be activated for the service. 4) Configure a policy map to apply actions to the identified traffic.